Your location: Home   Products   Vapor Blasting Pot  Vapor Blasting Pot
Vapor Blasting Pot
Vapor Blasting Pot

Vapor Blasting Pot

Vapor Blasting Pot
Product Detail


Vapor Blasting Pot

Application

Vapor abrasive blasting (also known as wet abrasive blasting) removes coatings, contaminants, corrosion and residues from hard surfaces. It’s similar to dry sand blasting, except that the blast media is moistened

prior to impacting the surface. The main advantage of vapor abrasive blasting over sand blasting is that it reduces dust, allowing for operators to work in a wide range of environments with minimal setup and cleanup costs. It results in a cleaner, more consistent finished, ready to coat, with no embedded particles or clinging dust.

Description

Vapor Abrasive Blasters also use a mixture of water and media within the blast pot. The delivery of this mix is what differentiates the two. Vapor Blasters use water pressure within the pot to force the mix out and into the blast hose where it is then carried out to the nozzle by air pressure. Vapor Blasters can be used at lower pressures since the water pressure is what is forcing the mix out of the pot. However, you still need to be mindful of your initial mix of media and water, and not to mention what you do with any unused media and water within the pot when the job is complete.

Benefits

Small and portable – makes it easy to move on the deck. It can handle both horizontal and vertical surfaces

Environmental friendly – 92% less dust and less media consumption compared to dry blasting. Uses less water than traditional water-based wet blasting, pressure washing or hydro jetting

No health risks – No risks due to vibrations caused by hand tools

Surface preparation – perfect feathering which creates a good adhesion of the paint, compatible with almost all grit types


Model

TSW-225 (movable)

TSW-500 (movable)

TSW-800

Tank Diameter

Ø225mm

Ø500mm

Ø800mm

Tank Height

1250mm

1350mm

1550mm

Tank Volume

55L

140L

330L

Add Water

10gal / 37.85L

20gal / 75.7L

30gal / 113.4L

Add Abrasive

100Lbs / 45.36KG

200Lbs / 90.72KG

300Lbs / 136KG

Continuous Blasting

30mins

60mins

90mins

Weight

~125kg

~190kg

~250kg

Working Pressure

0.4~0.7MPa

0.4~0.7MPa

0.4~0.7MPa

Blast Gun

1pc

1pc

1pc

Nozzle

Boron Carbide 10mm

Boron Carbide 10mm

Boron Carbide 11mm

Blasting Hose

ID 1’’, length 50’

ID 1’’, length 50’

ID 1’’, length 50

Control Method

Pneumatic Control

Pneumatic Control

Pneumatic Control

Compressed Air

Consumption

185+CFM / 5.24m3/min

185+CFM / 5.24m3/min

210+ CFM / 5.95 m³/min

Air hose

Blue; DN25

Blue; DN25

Blue; DN25

Abrasive Type

sand/glass bead

sand/glass bead

sand/glass bead

Warranty

1 year

1 year

1 year







Related products
Inquiry Now
Name: *
Mobile:
E-mail: *
Message: *
Verification code: *
  
Other products
Hot products