Welcome to Changzhou Taisheng Machinery Equipment Co.,Ltd.
logo_line

TS Machinery - Specialize in fabricating shot and sand blasting equipment

for surface treatment industry more than 10 years.

Home > Products > Sand Blast Cabinet  > Suction Blast Machine
PRODUCTS
CONTACT US
left_cont_pic

Turntable Blast Cabinet

    • Turntable Blast Cabinet
    • Turntable Blast Cabinet
Product details


Machine Descrption 


Suction Blast Cabinet with Trolley


As a rule, trolley units are designed for the processing of big and heavy products.


Siphon cabinets, also know as suction cabinets, use much less compressed air and are generally smaller units making them perfect for smaller workshops or lower productivity environments. Siphon cabinets uses a compressed air stream inside a siphon blast gun to create a vacuum in a chamber creating a negative pressure, pulling the abrasive into the nozzle.


The bottom part of the body of the machine is designed as a hopper, which collects the circulating blasting media. This material hopper is fitted with discharge buckets to which the blasting guns are connected.


On the back wall of the machine there is an updraft separator that catches residual blasting media, dust and light particles. After blasting, the parts are blown off by special nozzles in a chamber that is separate from the blasting chamber to remove any residual blasting media.


Application:

Used in sandblasting heavy workpieces, such as mold, stone carvings, motor and aluminum wheels etc.



turntable cabinet.jpg

Product Photos



8511555398523870.jpg 7821555398530937.jpg



Standard Model




Type

Working Space (mm)

Exterior Dimensions (mm)

Fan

Remarks

TS-PY-9080F

900*800*600

1800*1200*1600

550W

Side door with trolley

TS-PY-1010F

1000*1000*700

2000*1500*1700

550W

Side door with trolley

TS-PY-1212F

1200*1200*800

2200*1700*1800

750W

Side door with trolley



Machine Installation and Operation



Sandblasting machine should be placed on a solid ground in the work site, every machine before shipment is test at our factory, and packed in only one package. When you get it, just need to connect the power and compressed air source, put about 5kg abrasive in and start the machine, it's very easy to operateBlasting work is controlled by foot pedal, removing foot from pedal, the blasting stops.


Compressed Air Source Required

Make the pressure keep 0.3-0.7Mpa. Air consumption is about 0.8-1.2m³/min.


Consult
Message *
Name *
Phone
Email*
    
    
>>Drag the slider to verify<<

Hot Products