TS Machinery - Specialize in fabricating shot and sand blasting equipment
for surface treatment industry more than 10 years.
Pressure Sand Blasting Cabinet
It utilizes a pressurized container to blast the workpiece resulting in much higher productivity, brilliant for high volume blasting. Pressure Cabinets push the abraisve out of a pressurized vessel, through a metering valve and out of the nozzle.
Abrasive Available: steel shot/grit, stainless steel shot, alumnium shot and etc.
Widely used in removing rust, mill scale, heat treatment scale, and carbon build up from metals; Strip paint, powder coating, plating, and anodizing from parts for rework; Eliminate burrs, parting lines, flashes, and other defects from castings and injection-moulded parts; Remove residual sand from castings; Beautify steel, stainless steel, aluminium, brass and other metals with a uniform satin finish; Etch artwork and apply lettering on glass, stone, plastics, metal and other materials; Clean release agents and material build up from moulds.
Machine Installation and Operation
Sandblasting machine should be placed on a solid ground in the work site, every machine before shipment is test at our factory, and packed in only one package. When you get it, just need to connect the power and compressed air source, put about 5kg abrasive in and start the machine, it's very easy to operate. Blasting work is controlled by foot pedal, removing foot from pedal, the blasting stops.
Compressed Air Source Required
Make the pressure keep 0.3-0.7Mpa. Air consumption is about 0.8-1.2m³/min.
Welcome to watch our video,