Welcome to Changzhou Taisheng Machinery Equipment Co.,Ltd.
logo_line

TS Machinery - Specialize in fabricating shot and sand blasting equipment

for surface treatment industry more than 10 years.

Home > Products > Shot Blast Machine  > Continous Hanger Machine
PRODUCTS
CONTACT US
left_cont_pic

Continuous Hanger Machine

    • Continuous Hanger Machine
    • Continuous Hanger Machine
Product details

TS Continuous Hanger Machines are designed to clean a wide range of parts size and shapes. These shot blasting machines can be set up with overhead conveyors and with multiple blast wheels. Parts are loaded onto a hanger and moved in, got blasted and moved out.


Used to de-scale and de-rust metal surfaces; Remove paint and powder coating; De-burr, de-flash and remove sand from castings and moulding; Provide decorative finishes to stainless steel, aluminium and other non-ferrous metals; Increase the adhesion of the paint and finally to improve the surface and inner quality. Widely used in metallurgy, petroleum, chemical, machinery and other industries.


Machine Introduction 

The equipment mainly consist of entry/exit vestibule, blasting chamber, wheel, hanger transport system, slot pipe, elevator, separator, abrasive feed system, dust collector and electrical control system. 

图片14.png


Blasting Coverage 


3361554360262943.png

Main Cabinet 

The main cabinet consists of cleaning room, entry/exit vestibule, shot blasting system, top sealing device and sealing curtain.

4881554361024693.jpg

Abrasive Recovery System

The circulating system is composed of screw conveyer, bucket elevator, shot and sand separator, pneumatic shot gate valve, shot tube and so on


图片12.png

Filter Unit

There are two sets filter mounted at entry and exit vestibule, dust removal system is mainly composed of housing, cartridge filter\, pulse system, ash hopper, air ducts, fans, silencer, etc.

图片13_副本.jpg

Electrical Control System                              380V/50Hz/3Phase + N + PE(customize is available)

The whole system is equipped with automatic/manual switch, electrical interlock, self-lock, fault alarm emergency stop and other safety protection functions to ensure the safe operation of the equipment. 

8291554361719573.jpg3411554361762152.jpg

Technical Data

Item

TSX0516-6

Job Size

Section(WXH)

500*1650mm

Length

3000-6000mm

Surface Requirement

Cleaning

A-B Sa2-2.5

Roughness

15-50μm

Blast Wheel

Qty

8pcs

Shot Flow Rate

120kg/min/pcs x 8pcs

Power

7.5kw x 8pcs

Max. Bearing/Hook

1000kg/m(customer scope)

Hanger Running Speed

0.4-3m/min

Dust Collector Capacity

25000m³/h

Abrasive Circulation System

60T/h

Total Power

≈70kw

Note: our equipment can be designed according to customer special requirements


悬链通过式抛丸机_副本.jpg

图片9_副本.jpg


Consult
Message *
Name *
Phone
Email*
    
    
>>Drag the slider to verify<<

Hot Products