It is well known that saving abrasives from wet blasting machines is closely related to production success. In order to achieve the fastest efficiency and lower abrasive loss, we need to understand the user product data quality and specific accurate data. Only by understanding, we can play a better role. Let's talk about five ways to use the wet blasting machine to save abrasive.

1. The rough edges are brittle

A wet blasting machine utilizes the cryogenic effect of liquid nitrogen to embrittlement of rubber-plastic alloy data. At this point, the wool edge is brittle before the product. In the time difference between the wool edge being brittle and the product not being brittle, the rubber-plastic alloy product and aluminum are removed by high-speed spraying of polymer particles and touching the wool edge of the product. Rough edges of zinc alloy products.

2. Dust collectors

Adjust the wet blasting machine to a better position before use. The wet blasting machine is a Compressed air machine that produces high-speed jets that change the appearance and mechanical properties of a workpiece. The wet blasting machine can adjust the viewpoint of sandblasting actively by means of the electric control system. Sandblasting time. Sandblasting interval. Blowback time. The movement of the spray gun. Table speed, etc. . Timely cleaning dust collector (function: Purify Air) filter core, timely pour out the internal waste sand, try to reduce the use of abrasive.

3. Airbrush

Before using the wet blasting machine, check the gun for wear (the basic type of part failure), and once the nozzle is checked. Nozzles and other places that have worn (the basic type of parts failure), should be replaced in time, indirectly to avoid the waste of abrasive.

4. Sand pipes

Whether the sand pipe is straight is a necessary check before working with the wet blasting machine. If you fold it, you're sure to waste the frosting.

5. The separator

It is the most important part of saving abrasives. Before choosing to purchase the wet blasting machine, it is better to inform the manufacturer of the exact type of abrasives before the process is determined so that the wet blasting machine manufacturer can be well designed to incorporate the specifications you need to achieve accurate control. A wet blasting machine is used to make the data of oak and plastic alloy brittle by cryopreservation of liquid nitrogen. At present, the raw edge is brittle before the product, high-speed spray polymer particle touch products for rough edges high-quality removal of oak and plastic alloy products and aluminum. Rough edges of zinc alloy products. Abrasive will naturally help reduce the amount of application.

Blast cleaning is a widely used process in mechanical manufacturing, where forging, casting, heat treatment, and surface treatment of parts, are all to be Shot Blast Machine to clean. Feel Free to contact us for more information on the Shot Blast Machine.