Categories
Application
Hook type shot blasting machine is suitable for,
cleaning or strengthening the surface of medium - and small-sized castings and forgings, electrical, construction, machine tools.
surface cleaning and shot blasting of multi-variety and small-batch castings and steel structural parts to remove a small amount of sand core, sand and oxide skin on the surface of the workpiece.
cleaning the thin parts which are not suitable for collision.
With advantages of,
No pit foundation job.
Blasting chamber lining with high chromium wear-resistant plate, compare with rubber, significantly improvde the service life.
Compact structure, small floor occupation.
High production efficiency, low operation cost.
Technical Data
Model | TSD0612-1B Monorail Hanger Shot Blast Machine |
Maximum Product | Φ600 x H1200mm |
Cleaning requirement | Meet GB8923-88 A-B Sa2½, surface roughness Ra12.5 |
Hanger Lift Capacity | 800kg/hook |
Time of cleaning one hook | Casting 8-15min; Forging 5-8min |
Recommend Abrasive | Φ0.8~Φ1.2mm steel cut wire or steel shot |
Abrasive Initial Feed | 400kg |
Pit Foundation | Not required |
Overall machine height | 4700mm |
Overall machine width | 4500mm |
Overall machine length | 4000mm |
Total Power | ~23KW |
Surface Cleaning Result