TS Machinery - Specialize in fabricating shot and sand blasting equipment
for surface treatment industry more than 10 years.
What is a Blast Cabinet?
A Blast Cabinet is a unit where an abrasive blasting process is utilized inside a closed loop system. Unlike the conventional blast pots, the cabinets allow the operator to blast the workpiece, keeping the spent abrasive contained inside protecting the operator and surrounding area while recycling the abrasive continuously.
Siphon cabinets, also know as suction cabinets, use much less compressed air and are generally smaller units making them perfect for smaller workshops or lower productivity environments. Siphon cabinets uses a compressed air stream inside a siphon blast gun to create a vacuum in a chamber creating a negative pressure, pulling the abrasive into the nozzle.
TS blast cabinet is suitable for less demanding users who still expect reliable and high-quality blasting cabinet.
Main Characteristics of the Machine:
Right side door for easy loading;
Resilient-to-scratches LED lighting system for exceptional visibility;
Blow-off (blowing) gun;
Foot pedal operated blasting;
Bag filter make sure this machine is dustless while blasting.
Available Abrasive: Mesh 36-220 aluminium oxide, glass bead, zircon sand, carborundum, silicon carbide and etc.
Widely used in removing rust, mill scale, heat treatment scale, and carbon build up from metals; Strip paint, powder coating, plating, and anodizing from parts for rework; Eliminate burrs, parting lines, flashes, and other defects from castings and injection-moulded parts; Remove residual sand from castings; Beautify steel, stainless steel, aluminium, brass and other metals with a uniform satin finish; Etch artwork and apply lettering on glass, stone, plastics, metal and other materials; Clean release agents and material build up from moulds.
Working cabinet size(mm)
Machine Installation and Operation
Sandblasting machine should be placed on a solid ground in the work site, every machine before shipment is test at our factory, and packed in only one package. When you get it, just need to connect the power and compressed air source, put about 5kg abrasive in and start the machine, it's very easy to operate. Blasting work is controlled by foot pedal, removing foot from pedal, the blasting stops.
Compressed Air Source Required
Make the pressure keep 0.3-0.7Mpa. Air consumption is about 0.8-1.2m³/min.
Welcome to watch our video,