Categories
Products | Steel Shot | Steel Grit | |
Chemical Composition | C | 0.70~1.20% | 0.80-1.20% |
Mn | 0.35~1.20% | 0.20-1.20% | |
Si | ≥0.40 | 0.15-1.20% | |
S | ≤0.05% | ≤0.05% | |
P | ≤0.05% | ≤0.05% | |
Microhardness | Normal:40~50HRC (377~509HV) | GP:40~50 HRC (377~540 HV) | |
Hardness Deviation | Max Deviation ±3.0HRC | Max Deviation ±3.0HRC,±40HV | |
Microstructure | Tempered Martensite or Sorbite | Even tempered marten-site and dispersed carbon | |
Density | 7.4g/cm3 | 7.50g/cm3 | |
TS Machinery supply a wide range of Abrasive Blasting Media to suit your Sand Blast Cleaning or Shot Peening requirements. The type of surface, the condition of an existing protective coating and the desired finish all need to be considered when choosing the most suitable Abrasive Media.
Here is some helpful information that can help you choose the most suitable Abrasive Media for your Abrasive Blast Cleaning or Shot Peening job.
Application:
● De-scale and de-rust metal surfaces.
● Remove paint and powder coating.
● De-burr, de-flash and remove sand from castings and moulding.
● Provide decorative finishes to stainless steel, aluminium and other non-ferrous metals.
● Etching of glass, stone and metals.
● Removal of release agents and contamination from mould.
Steel Grit
Steel Shot
Inquiry Now
