TS Machinery - Specialize in fabricating shot and sand blasting equipment
for surface treatment industry more than 10 years.
TS Machinery offers a wide range of roller conveyor shot blasting machines from small simple machines to construction blasters, heavy duty machines and complete preservation product line.
It is mainly used for steel structure and H beam surface cleaning and strengthening, descaling and eliminate internal stress and increase the paint adhesion, etc. After treatment, the fatigue strength increased, the steel surface and inner quality improved.
The equipment mainly consist of Roller Conveyor System, Blast Cabinet, Shot Blasting System, Shot Cleaning System, Abrasive Recycle System, Dust Collector System and Electrical Control System.
Shot blasting machine is different with other machines, which is easy to have the wearing parts. So durable of the machine is significant important. TS Machinery using SP Mn steel plate fully convered the blasting cabinet as protective. Besides, at the plate joint, there manganese strips welded onto the cabinet which can fully behind the gap.
Blast wheel is mounted on blasting cabinet on different direction, there is several blast wheels at the upper and lower part according to different products. The arrangement is tested and verified by 3d dynamic presentation before fabricated, can achieve the best cleaning result.
Clean up the shot remains on product surface after blasted, 99% shots can be removed, which is good for keeping workshop clean and save shots.
Abrasive Recycle System
This system is aim to collect the good shots for recycle using, all by transmission parts. Auger and elevator to transport the shots from the bottom to top, separator is key factor to effect on the blasting efficiency and working environment, if without good design, the machine will be with low working efficiency and bad working environment.
Dust Removal System
Cartridge filter is a key component of dust removal part, its working conditions directly affect the indoor environment and outdoor emission standards. By increasing the filter area of the dust collector, to reduce the filtration speed, thereby reducing the amount of dust emission.
Electrical Control System 380V/50Hz/3Phase + N + PE(customize is available)
The whole system is equipped with automatic/manual switch, electrical interlock, self-lock, fault alarm emergency stop and other safety protection functions to ensure the safe operation of the equipment.
Conveyor Speed（variable speed）
Abrasive Recycle Capacity
Note: our equipment can be designed according to customer special requirements
Welcome to watch our video,